Remington 5 1/2 Primers Small Pistol Box of 1000 (10 Trays of 100)

Description

                   Remington 5 1/2 Primers

Remington 5 1/2 Primers understands how critical it is to have the best quality ammunition available in order for your rifle to function to its maximum potential whether hunting or shooting. This begins with the use of the highest-quality components available in the ammunition manufacturing process. These are the exact primers that Remington use in the manufacture of their own ammunition, and they   ( Remington 5 1/2 Primers ) perform to the highest of industry expectations. You must start with the best if you want the most performance out of your handgun, which is why reloaders pick Remington components for their loads.

Every Remington primer (Remington 5 1/2 Primers )  is made up of a number of subcomponents that have been built to extremely tight tolerances. The dimensions of the primer cup are regulated to.0001″, and the priming mix has been precisely prepared to provide consistent ignition with a broad variety of powder kinds and compositions. Remington 5 1/2 Primers are subjected to reliability testing at temperatures ranging from -20 degrees F to +150 degrees F. The unique tripod anvil design creates a larger strike area while maintaining maximum sensitivity, even when the firing pin strikes off center of the anvil.

Every centerfire primer (Remington 5 1/2 Primers )   is made up of a collection of subcomponents that have been meticulously built to extremely tight tolerances. The dimensions of the primer cup are regulated to four decimal places. When used with a broad variety of powder types, the priming mix is precisely prepared to ensure consistent ignition. Remington 5 1/2 Primers  has also been tested for dependability throughout a temperature range of -20 to +150F. The weight of each Remington 5 1/2 Primers pellet is precisely regulated to.01 grams. Because of the unusual tripod anvil design, there is a bigger “sweet spot” with maximum sensitivity – even with firing pin hits that are off-center. Lastly, each batch is submitted to a thorough visual inspection before being subjected to vital ballistic testing.

Within every 5-1/2 small mag pistol centerfire primer ( Remington 5 1/2 Primers ) is a group of subcomponents assembled to exceptionally precise tolerances. Primer cup dimensions are controlled to four decimal places. The priming mix is specially formulated for consistent ignition with a wide variety of powder types, and tested for reliability over a temperature range of -20°F to +150°F. Individual primer pellet weight is controlled to .01 grams. A unique tripod anvil design creates a larger “sweet spot” with maximum sensitivity – even with off-center firing pin strikes. And lastly, each lot is 100% visually inspected and subjected to critical ballistic tests.

Product Overview

We now offer the Remington 5 1/2 Small Mag Pistol Primer (1000 Count) . The Remington 5 1/2 Small Mag Pistol Primers are made with a very closely controlled, specifically formulated chemical mixture to ensure that no matter the powder, ignition is always fast and consistent. The Remington 5 1/2 Primers are made with a three legged design that gives the largest area for the flash and a bigger striking area for the firing pin. The 5 1/2 Small Mag Pistol Primers are designed and tested to function in extreme temperature ranges from -20°F to +150°F. Each 5 1/2 Small Mag Pistol Primer is produced to exacting tolerances with a deviation no larger than .0003 ounces. All 2 5 1/2 Small Mag Pistol Primers are visually inspected and undergo critical ballistic tests.

Summary

The Remington 5 1/2 Small Mag Pistol Primer is a premier tripod designed flash cup with a larger than standard striking area that ensures positive fast ignition of most all available powders with a weight consistency of .0003 ounces. All 5 1/2 Small Pistol Primers are tested in controlled scientific environments for ballistics performance and quality. The 5 1/2 Small Pistol Primer will perform from -20°F to +150°F to ensure no matter where you use them, they will perform at the top level.

Specifications and Features:

• Designed To Perform From -20°F To +150°F
• Weight Checked To .0003 Oz
• 100% Visually Inspected
• Tripod Anvil Design Gives Large Flash And Larger Striking Area

Made In United States of America

 WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.